Faculty of Science and Engineering: Recent submissions

Now showing items 1201-1220 of 1386

    • Design and Fabrication of an Automatic Double Hacksaw 

      Ataur Rahman, BME-200383; Hossain, Selim; Alam, Md. Shahinur; Islam, Md. Mirajul; Hussain, Nazmul (Sonargoan University, 2020-02-06)
      1.A hacksaw is a fine-toothed saw, originally and mainly made for cutting metal, plastic or wood. For industries to realize the production, it is necessary to cut metal, plastic bars with high rate. So, it’s not possible ...

    • Construction of Mini Electric Chiller 

      Md. Rasedul Islam, BME-200382; Zaman, Md. Rashed; Islam, Hedayetul; Roy, Dalim Kumar (Construction of Mini Electric Chiller, 2020-02-04)
      A chiller is a device which cool a fluid by removing heat from it, either through a vapour – compression cycle; with the key components being the compressor, condenser, evaporator and expansion device... This paper ...

    • Study of Fabrication of Emergency Eye Wash 

      Md. Assaduzzaman, BME-200381; Das, Hirdoy; Hasan Bappy, Md Hasebul; Hasan, Md. Naser; Day, Jewel Chandro (Sonargoan University, 2020-02-06)
      Chemical contact with eye can cause severe ocular damage leading to blindness. Treatment of on ocular burn can be sever and difficult to manage. New designs of eye wash stations have been developed in which the direction ...

    • Design ,Construction, and Performance Test of Induced Draft Wet Counter Flow Cooling Tower 

      Md. Saiful Islam, BME200380; Islam, Md. Shariful; Chowdhury, Miton (Sonargoan University, 2020-02-10)
      A cooling tower is a heat rejection device that rejects waste heat to the atmosphere through the cooling of a water stream to a lower temperature. Cooling towers are used in all heat producing industries. Cooled water ...

    • Fabrication of an Automatic Barking system 

      Md. Al Amin, BME-200379; l Islam, Md. Nazmu; Kamruzzaman, Md. (Sonargoan University, 2020-02-19)
      An ultrasonic car braking system includes; an ultrasonic wave emitter provided in a front or portion of an automatic braking car producing and emitting ultrasonic waves frontward in a predetermined distance in front of the ...

    • CONSTRUCTION METHOD OF'CAST IN SITU PILE 

      Islam, Md. Nurul; Islam, Md. Zahidul; Rahman, Md. Mahbubur (Sonargaon University (SU), 2020-03-15)
      The study was coaducted in the Deparffirent of Civil Engineering at Soaargaon Uaiversity Bangladesh with the objectives to prepare a prcject and &esis with a view to partial firlfillment of &e requirement for the degree ...

    • An Overview of 'Traffic Congestion', 

      prodhan, Md. Nazin Hossain prodhan (Sonargaon University (SU), 2020-06-15)
      Deficiencies in present roadway network of Dhaka cig have reached to such an alanrring state where scopes of traffie improvement are getting confined day after day. Weak infrastructure has provoked the heterogeneous ...

    • ROAD SAFETY MEASURES IN BANGLADESH 

      Unknown author (Sonargaon University (SU), 2020-03-15)
      Being a riverine country, the road transportation system is vitally important to the economic and social welfare of Bangladesh. Therefore, it must be so maintained and conlinually improved with due consideration for ...

    • EF'F'ECT OF CURING DAYS ON CONCRETE MADE BY PARTIALLY REPLACED CEMENT BY FLY ASH 

      Hossain, Md. Anwar; Al Touhid, Md. Saitultah; Karim, Md. Rezaul; Razzaque, Md. Abdur; Rahman, Md. Azizur (Sonargaon University (SU), 2020-10-15)
      Concrete is a construction material that is mostly used across the world. It is a composite material made out of water, cement, fine aggregate (sand) and coarse aggregate (stones). However, the manufacturing process of ...

    • Construction and Modification Of A Rocker-Bogie Mechanism Using Solar PV Cell System 

      Md. Tariqul Islam, BME-200377; Khan, Md. Odeya; Hossain, Md. Al-Amin; Hossain, Md. Anayet (Sonargoan University, 2020-02-04)
      The project was carried out to assess the Construction and Modification of a Rocker Bogie Mechanism using Solar PV cell system and designing to be used at slow speeds which is capable of overcoming obstacles that are on ...

    • Design & Construction of Automatic Railway Level Crossing System 

      Haider Khan, BME-200376; Ahmed, Tanvir; Ibn Jahir, Jobayer; Haldar, Rafayel (Sonargoan University, 2020-02-15)
      The present work attempts to automate the opening and closing of gates at a railway level crossing. In general, level crossing gates are operated manually by a gate keeper. The gate keeper receives the information about ...

    • Experimental Study of Solar Home System 

      Md. Osman Gony Lalon, BME-200375; Ahammed, Md. Tanvir; Saha Jalal, Gazi Mohammad; Shahnewaz; Asif Nihal, Asif (Sonargoan University, 2020-01-19)
      Solar energy is one of the most popular form of renewable energy. The use of solar panel is increasing rapidly all over the world. Fortunately, the location of Bangladesh is quite suitable for harnessing solar energy. ...

    • Construction and Analysis a in Injector for Accurate Fuel Injection 

      Ashrafuzzaman, BME-200372; Sarker, Md Mamun; Mamun, Abdullah Al; Hossain, Mosharraf (Sonargoan University, 2020-02-06)
      Controlling fuel injector positions is recognized as a challenge for injection spark ignition engines. These papers give a comprehensive overview of the study about the structure, measurement and impact of the engine's ...

    • Design, Construction and Onstruction and Performance Test of a Remote Controlled Scissor Jack 

      Ismail Hossain, BME-200371; Jewel, Md.; Islam, Md. Ariful; Hasan Sarker, Md. Rashadul (Sonargoan University, 2020-01-15)
      A Scissor Jack is a mechanical device used to easily lift a vehicle off the ground, to gain access to sections underneath vehicles or to change the wheel. The most important fact of a jack is that it gives the user a ...

    • Hybrid Power Generation System by Using Wind Solar Photovoltaic 

      Md.Abdul Malak, BME-200370; Sarker, Md. Parvez; Hossain, Shahadat (Sonargoan University, 2020-02-06)
      Renewable energy sources i.e., energy generated from solar, wind, biomass, hydro power, geothermal and ocean resources are considered as a technological option for generating clean energy. But the energy generated from ...

    • Design and Construction of a 360 Degree Flexible Drill Machine 

      Md. Rashidu Islam, BME-200349; Bhuiyan, Sazedur Rahman; Uddin, Md. Jasim; Bishwas, Md. Shakil; Hasan, Bijoy (Sonargoan University, 2020-01-24)
      Our project is rotated to easily drill at any direction. So that job setting operation is not complicated as well as reduces the setting time for the operation. It also takes into consideration the most effective method ...

    • Design and Construction of an Automatic Drainage Cleaner 

      Mehadi Hasan, BME-200348; Shohiduzzaman, Md.; Alam, Md. Ashraful; Nazmul, Md.; Alam, Shahin (Sonargoan University, 2020-02-24)
      In this thesis, the proposal concept is to replace the manual work in drainage cleaning by an automated system. Nowadays even though automation plays a very important role in all industrial applications, the proper ...

    • Construction of an automatic egg Hatching Incubator System 

      Md. Shimul Hossain, BME-200346; Rahman, Md Sohanur; Hamjal, Md Abu; Mia, Choin (Sonargoan University, 2020-02-19)
      The purpose of this project is to design and develop an egg incubator system that is able to incubate eggs from chicken, ducks, and goose. This system is called the Automated Egg Incubator (AEI). This project is ...

    • STUDY OF THE CONVENTIONAL HVAC SYSTEM AND DEVELOPMENT OF AFFORDABLE VENTILATION SYSTEM 

      MD. MAMUN, BME-200345; SHAHIDULLAH, S M; HOSSAIN, MD. MELON; ALI KAWSIR, MOHAMMED (Sonargoan University, 2020-01-24)
      Ice based Cool Thermal Energy Storage (CTES) systems have attracted much attention during last few decades. The reasons are mainly of economic and environmental nature. Compared to conventional refrigeration and air- ...

    • Solar Panel and Battery Voltage Monitoring and Load Control Using Bluetooth 

      Rahman, Habibur; Ferdous, Jannatul; Mamun, Abdullah Al Mamun; Kumar Das, Subroto; Das, Kumar (Sonargaon University (SU), 2022-09-15)
      Accurate monitoring and measurement of solar photovoltaic panel parameters are important for solar power plant analysis to evaluate the performance and predict the future energy generation. There are always challenges ...