| dc.description.abstract | The Arc welding and the tungsten inert gas (TIG) welding method most commonly
used to weld ferrous metals, nonferrous metals, and other metals since it is simple,
easily implemented, and achieves consistent high-quality welds. In this study, butt
joints produced between two Mild steel (MS) have been achieved by using Arc
welding with E6012 electrode and TIG welding with ER4047 filler metal. In there
analyzing welding and mechanical properties of Butt-welding joints with two types of
test like 1. Destructive Test 2. Non-Destructive Test. Destructive weld testing, as the
name suggests, involves the physical destruction of a completed weld to evaluate its
strength and characteristics. In there the testing procedure is conducted to understand
a specimen’s material behavior, strength, quality of the welded joint, and the skill of
the welder by Tensile Strength test, Impact test, Nick break test, Face bend test, Root
bend test, Side bend test and Hardness test. This type of testing involves breaking a
sample fillet weld that is welded on one side only. These samples have a load applied
to its unwelded side and welded side, typically in a press, tension, breaking and the
load is increased until the weld fails. In this experiment Non-destructive testing
(NDT) is analysis technique used by industry to evaluate the properties of a material,
component, structure or system for characteristic differences or welding defects and
discontinuities without causing damage to the original part. | en_US |
