Fabrication Of An Electromagnetic Braking System

Abstract

This project aims to create an electromagnetic braking system model capable of applying brakes without any friction loss and without losing the energy supplied. It uses two electromagnets which are run by the supply of power from the battery. Also, there is a wheel which is attached to the motor so when the power is supplied, by the help of the motor the wheel rotates the generator motor for regenerate power from spin the wheel motor and store the power in battery. A metal bar is in the vicinity of the electromagnets and wheel so when the electromagnets produce eddy currents which stop the rotating wheel or rotor. This model helps in a way to be used as retardation equipment in vehicles. The main objective of our project is to control the speed of the vehicle as well as to stop it when and where quickly and efficiently. To make human life easier by using technology. To understand project planning and execution. After making our project we observe it very carefully. Firstly, when we press switch on then the project will be run. After that pressing a switch will turn the relay with power from the battery on and the motor will start and the wheel will continue to spin. Then when the brake pedal or push switch is pressed, the relay turns off the connection to the motor and the electromagnet brakes stop the wheel. Our project gives output perfectly and all equipment works perfectly. We check how much it works and we get perfect output from this project