| dc.description.abstract | This project aims to create an electromagnetic braking system model capable of applying
brakes without any friction loss and without losing the energy supplied. It uses two
electromagnets which are run by the supply of power from the battery. Also, there is a wheel
which is attached to the motor so when the power is supplied, by the help of the motor the
wheel rotates the generator motor for regenerate power from spin the wheel motor and store
the power in battery. A metal bar is in the vicinity of the electromagnets and wheel so when
the electromagnets produce eddy currents which stop the rotating wheel or rotor. This model
helps in a way to be used as retardation equipment in vehicles.
The main objective of our project is to control the speed of the vehicle as well as to stop it
when and where quickly and efficiently. To make human life easier by using technology.
To understand project planning and execution. After making our project we observe it very
carefully. Firstly, when we press switch on then the project will be run. After that pressing
a switch will turn the relay with power from the battery on and the motor will start and the
wheel will continue to spin. Then when the brake pedal or push switch is pressed, the relay
turns off the connection to the motor and the electromagnet brakes stop the wheel. Our
project gives output perfectly and all equipment works perfectly. We check how much it
works and we get perfect output from this project | en_US |
