SUSpace at Sonargaon University: Recent submissions

Now showing items 1781-1800 of 2319

    • Industrial Attachment At Liberty Knitwear Ltd (Micro Fiber Group) Chandra, Pallibiddyut, Kaliakoir, Gazipur 

      Hossain, Md. Monir; Ali, Md. Suruj; Sayem, Md . Rayan Ush; Saif, Md. Saiful islam (SU, 2021-11-15)
      For any technical education, practical experience is almost equal important in association with the theoretical knowledge. By means of practical knowledge it’s not possible to apply the theoretical knowledge in the ...

    • A case study on Idle time identification and reducing idle time through work study and line balancing to increase the productivity in sewing section of knit garments. 

      Paul, Suman Chandra; Arafat, Md.Easir; Nibir, Kamruzzaman; Rahman, Md. Siddkur (SU, 2021-10-05)
      Bangladesh's export revenue carries more than 76% contribution from the Textile and Apparel industries. In sewing floor there are several problems which hamper the productivity and efficiency and thus we do not get desired ...

    • Industrial Attachment At Irish Fabrics Ltd.(Irish Group) Zirani, Kashimpur, Gazipur. 

      Mottalib, Abdul; Rana, Md. Jewel; Ahmed, Md. Shuaib; Hossain, Biplob (SU, 2022-11-25)
      Textile and garments sector is the biggest and fastest growing sector in Bangladesh. It is also the highest foreign currency earning sector in Bangladesh. Among this sector, Knit garment is growing very rapidly due to ...

    • “Smart Garments Factory and What is required to setup a Smart Garments Factory” 

      Mia, Md. Uzzal; Shazib, Md.; Roy, Nihar; Sifat, Md. Habibur Rahman (SU, 2022-02-15)
      Since Industry there is a growing interest in smart manufacturing across all industries. However, there are few studies on this topic in the garment industry despite the growing interest in implementing smart manufacturing. ...

    • Industrial Attachment 

      Mia, Md. Shobuj; Hosan, Afjal; Rajon, Md. (SU, 2021-10-24)
      The project is on industrial training in garments. Traditionally operated garments industries are facing problems like how productivity, longer production lead time, high re-work and rejection, poor line balancing, low ...

    • : Industrial Attachment 

      Mia, Md. Shobuj; l Hosan, Afjal; . Rajon, Md. (SU, 2021-10-24)
      The project is on industrial training in garments. Traditionally operated garments industries are facing problems like how productivity, longer production lead time, high re-work and rejection, poor line balancing, low ...

    • INDUSTRIAL TRAINING 

      MAHAMUD, ARAFAT (SU, 2021-12-25)
      Ready-made garment is one of the golden of our country. The role of this sector in our socio-economic development cans hardly be over emphasized KDS Garments Company Ltd. is one of the most successful and recognized ...

    • „„Effect of Antimicrobial Finish of Woven Fabric in Garments” 

      Hossain, Md. Monir; Sayem, Md.Ryan Ush; Saif, Md.Saiful Islam; Ali, Md.Suruj (SU, 2022-12-25)
      This Thesis is the “Effect of antimicrobial finish of woven fabric in garments” Traditionally operated garment industries are confronting issues like Mask size different, low productivity, PPE fabric faults , high remake, ...

    • COST EFFICIENT SOFT SOIL IMPROVEMENT TECHNIQUE FOR A SPECIFIC PROJECT AT NAMAPARA, KHILKHET, DHAKA. 

      Karim, S. M.; Ahamad, Md. Bakir; Hasan, Md. Mahadi; Uddin, Md. Bahar; Mia, Md. Feroz (Sonargaon University (SU), 2022-06-15)
      This paper contains the cost efficient soft soil improvement techniques for a specific project at Namapara, Khilkhet, Dhaka. The objective of this research is to analyze the different soil improvement techniques and ...

    • QUALITY CONTROL OF ROAD CONSTRUCTION IN DHAKA SOUTH CITY COPORATION 

      HOSSAIN, MD: RIPON; AHMED, MD: MOULIK; ISLAM, RIADUL; MAHMUD, MD: HANIF; HOSSAIN, MD: ARIF (Sonargaon University (SU), 2022-06-15)
      The title of the thesis presented herein, refers the primary objectives that underpin the research work. As a high growing metropolitan city with high population density and increased rate of transportation needs, the ...

    • Analysis of Traffic Jam from New Market to Dhanmondi 27 and Findings Its Possible Solution 

      Salehin, Minhazul; Rana, Zaheed Islam; UzzalHossain, Md.; Hossain, Md. Shamim (Sonargaon University (SU), 2022-06-15)
      Dhaka is the capital of Bangladesh, is the most densely populated city in the whole world. More than twelve million people lives in Dhaka city. Day by day the number is increasing and most part of Dhaka is badly affected ...

    • COMPARISON OF THE PROPERTIES OF ALTERNATIVE BUILDING BLOCK WITH BURNT CLAY BLOCK 

      CHANDRO, POLASH; RUBEL, MD.; MONIRUZZAMAN, MD.; SHIL, APU CHANDRA; NUR, MD. SHAH ALAM (Sonargaon University (SU), 2022-06-15)
      Environment pollution is the most concerned issue in today’s world. Construction Industries is one of the largest sectors to pollute the environment. In Bangladesh, burnt clay block is the most commonly used building ...

    • SEISMIC ANALYSIS AND COMPARISON OF VARIOUS BUILDING PARAMETERS FOR DIFFERENT ZONES ACCORDING TO BNBC 2020 

      KHAN, MD.SARAFOT; BARMON, SHAPON CHANDRO; MOLLA, RUMAN; HOSSEN, MD MONIR; KHAN, NOWROZ AHSAN (Sonargaon University (SU), 2022-06-15)
      This thesis shows the effects of seismic load analysis of different zones of Bangladesh which states in BNBC 2020. We perform Linear Static Analysis and Response Spectrum Analysis by ETABS version 16.2.1. We performed ...

    • PRODUCTION OF LIGHTWEIGHT BUILDING BLOCK 

      Mazumder, Polash Chandra; Mollah, Md. Rakibul Islam; Islam, Md. Safiqul; Abbasi, Md. Sabrian; Hossain, Md. Jamal (Sonargaon University (SU), 2022-06-15)
      Environment pollution is the most concerned issue in today’s world. Construction Industries is one of the largest sectors to pollute the environment. In Bangladesh, burnt clay block is the most commonly used building ...

    • NEWAGE GROUP NEWAGE APPARAL LTD. NEWAGE GARMENTS LTD 

      Rayhan, Md Abu (SU, 2021-12-15)
      For any technical education, practical experience is almost equal important in association with the theoreticalبknowledge.بByبmeansبofبpracticalبknowledgeبit’sبnotبpossibleبtoبapplyبtheبtheoreticalب knowledge in the ...

    • Industrial Attachment On JOY AUTO GARMENTS 

      Sifat, Habibur Rahman (SU, 2021-11-01)
      For any technical education, practical experience is almost equal important in association with the theoretical knowledge. By means of practical knowledge it’s not possible to apply the theoretical knowledge in the practical ...

    • Scenario of Safety Issues Prevailing Accident in Rural Engineering Workshop in Bangladesh 

      Rahman, Mahbubur; Hossain, Md. Arafat; Hossain, Md. Mostofa (Sonargoan University(SU), 2017-12-10)
      Safety is the condition being protected against any hazardous situation and any other type of failure, error and accidents. As a developing country our technology is growing day by day. But the man who works to develop ...

    • Energy Storage in an Impure Paraffin Wax Embedded in the Finned-Annulus of Two Horizontal Tubes: Part-Il 

      Tabassum, Tonny; Hasan, Mainul; Begum, Latifa (Sonargoan University(SU), 2017-12-10)
      This Part-Il of the manuscript reports on the unsteady two-dimensional numerical investigations of melting of a paraffin wax (phase change material, PCM) which melts over a temperature range of 8.70C. The PCM is placed ...

    • How Do Domestic Products Help Branding Bangladesh Globally? 

      Kamal, Mushfeka Binte; l Amin, Ruhu; Sarkar, Cathy Bipasha (Sonargoan University, 2017-12-10)
      This paper showed how nation branding can help Bangladesh capture the global market with the help of its domestic products. The study was qualitative in nature and based on secondary data only. This study found that nation ...

    • COMPARISON OF LEVEL OF SERVICE OF PANTHAPATH SIGNAL DURING PEAK HOUR AND OFF PEAK HOUR USING HIGHWAY CAPACITY MANUAL 

      SULTANA, SAHANAJ; ISLAM, ABM ARIFUL; KUMAR, SREE NIRANJON; QUDDUS, FAHIM BIN; KHAN, MD SAKIB (Sonargaon University (SU), 2022-06-15)
      The goal of traffic engineering is to safe, convenient and time efficient movement of people and goods on roadways. The three main parameters of a traffic flow are volume, speed and density. This study is on the Level ...