SUSpace at Sonargaon University: Recent submissions

Now showing items 2241-2260 of 2324

    • Restaurant Order Management System 

      Sheikh, Md Al-amin; Kafi, Abdullah Al; Sohel, Nrn Mohammad (Sonargaon University (SU), 2018-01-15)
      The project "Res&iurant Order Mnnageme,lrt System" is implemented to reduce the maniral work and enhances the accuracy of work in a restaurant. This system manages and maintains the record of customers and room in the ...

    • Report on Industrial Attachment at MG Niche Flair Limited Unit-2 

      Md. Rabbi, Hasan (Sonargaon University, 2021-12-31)
      For any technical education, practical experience is almost equal important in association with the theoretical knowledge. By means of practical knowledge it‟s not possible to apply the theoretical knowledge in the practical ...

    • A Review on Renovation of Gas Turbine to Improve Efficiency by using compressor water wash 

      Rahman, Mahbubur; Hossain, Md. Mostofa Hossain (Sonargaon University (SU), 2017-06-15)
      The abitity to predict the behavior of a turbine engine and optimize its performance is important in economic, thermal and condition obseruation studies. Fouling is one of the maior sources oJ compressor deterioration. ...

    • Design and Fabrication of a U tube type BFU Heat Exchanger 

      Uddin, Md. Nesar; Habib, Ahsan; Kabria, Md. Golam; Adnan, Md. Sakil (Sonargoan University, 2020-02-04)
      A heat exchanger is an equipment used for transferring heat from one medium to another. There is a wide application of u tube type heat exchanger in the field of industrial applications for its enhanced heat transfer ...

    • Modified Roof-Top Garden as a Tuned Mass Damper for Vibration Control of Building Structure Under Earthquake Excitation 

      Rahman, Mohamrnad Sabbir Rahman; Sarraz, Atik; Islam, Mohammad Saiful; Hasnat, Abul (Sonargaon University (SU), 2017-06-15)
      Tuned Mass Damper(TMD) is very popular to mitigate the vibration of the structure under any Qpe of random loadings like as Wind or Earthquakes. This researchwork mainly.focuses on to modify the roof- top garden as a ...

    • Social Networks: Perceived Impact on Student's Academic and Personal Life 

      Amin, Ruhul; Khan, Al-Amin; Ahammad, Taslim Ahammad; Ferdous, Khadizatul; Molla, Md. AI-Amin (Sonargaon University (SU), 2017-06-15)
      The present study attempts to explore usage of social networking sites among the students qndtheir perception toward the impact of lhese sites on their academic and personal life. For conducting the stud1,, a sample of ...

    • Gesture control (Gyroscope) based transmitter unit and voice module based received station with Arduino UNO and Arduino Nano and other sensors 

      Basak, Suvaghya (Sonargoan University, 2020-02-24)
      The hand gestures can be used to represent various signs with the help of the flex sensors. The gesture representation includes the movements such as angle bends and direction changes. The flex sensors which are fitter ...

    • Modeling of Solar Based Paddy Harvesting Machine 

      Ahmed, Soleman; Rahman, Matiur; Rahman, Md. Hafijur; Yousuf Azim, Md. Azilam (Sonargoan University, 2020-02-06)
      Uses of solar energy attract world-wide attention day by day in the sake of their nonpolluting nature. Now a day’s solar collectors are used in the modern world to face the future energy problem. The main purpose of ...

    • Design And Fabrication of Automatic Color Sorting Conveying Mecanism 

      MIA, MD. BASIR; Khan, Rahat; Chakma, Pollen; Md. Sazibul Hasan, Md. Sazibul; Das, Debangshu (Sonargoan University, 2020-02-04)
      The purpose of this model is to design and implement a system which automatically separates products based on their color. This machine consists of four parts: Conveyor belt, color sensor, servo motor and DC Gear motor. ...

    • “Design & Fabrication of an Automatic Lawn Mower” 

      Rahman, Ahmed Minhajur; Alam khan, Md. Mostak; Ashaduzzaman; Hassan, Md. Naimul (Sonargoan University, 2020-02-04)
      This project is proposing an effective goal for developing a machine that will perform useful task independently with minimal supervision. The objective of this project is to discover the current issues in implementing ...

    • Design & Construction Of Automatic Wood Cutter 

      Kundu, Arjun; Riaj-Ul-Haque, Md.; Parvez Hossain, Md.; Ariful Islam, Md. (Sonargaon University (SU), 2020-02-22)
      A sawmill or lumber mill is a facility where logs are cut into lumber. Modern sawmills use a motorized saw too cut logs lengthwise to make long pieces, and crosswise too length depending on standard or custom sizes ...

    • Strength Variation of Concrete Between Cylindrical and Cubical Specimen Due to Various Proportion of Ingredients 

      Akter, T.; Wahid, Md. Ferdous; Siddique, A.B. (Sonargaon University (SU), 2017-06-15)
      The objective of this reseLtrch was to delerutine the relationship betw,een contpressive strength of'cubes ctnd cylinders that were produced and cured in Laboratory- of Sonargaon Uflircrsih. The stud1, is based on the ...

    • Effectiveness of Using Slag as Coarse Aggregate and Study of its Impact on Mechanical Properties of Concrete 

      Hasnat, A.; Qurishee, M. A.; Iqbal, I. T.; Zaman, M W; Wahida, M. F. (Sonargaon University (SU), 2017-06-15)
      Traditional coarse materials like stone chips, brick chips are very costly. Httge amottnt of stone chips are being withdrawn regularly .from difJbrent sotrrces. As a result one day the amount of stone chips will be ...

    • Design and Construction of a low cost Laptop 

      Babu, Delower Hasan; Parvez, Md. Masud; Hossain, Md. Millat (Sonargoan University, 2020-01-24)
      A laptop computer, commonly shortened to a Desktop computer, is a mobile device, typically with a mobile operating system and touchscreen display processing circuitry, and a rechargeable battery , thin and flat package. ...

    • Fabrication of a Smart Irrigation System 

      Aswad, Syed Micdad Bin; Khan, Md. SidurRahman; Ahammed, Md. Razu; Alamin, Md. (Sonargoan University, 2020-02-04)
      This work is based on a smart system that will be used to irrigate using solar system. The device will automatically irrigate water by giving it water. Our automated system will prevent you from providing water when ...

    • Construction of a Low Cost 3D Printer Using Arduino . 

      Ahmed, Rajin; islam, M Rafiqul; Hossan, Md Mukter; das, Sajib Chandra (Sonargoan University, 2020-02-06)
      3D printing is a form of additive manufacturing technology where a three dimensional object is created by laying down successive layers of material. It is also known as rapid prototyping, is a mechanized method whereby ...

    • Fabrication of an IOT Based Wi-Fi Controlled Surveillance Robot 

      Hossain, Tahmid; Islam, Md.Wajiul; kawkab, Md.Shanawaj (Sonargoan University, 2020-02-06)
      The Field of robotics has been exponential growth with the amalgamation of multiple domains. The holistic approach is proving to be a boon, where communication engineering, mechanical engineering, embedded system and ...

    • Community Based Approaches to Disaster Risk Reduction in Bangladesh 

      Rashidin, Md.Salamun; Hasnat, Abul; Javed, Sara; Mustafa, Tahmid; Jians, Wang (Sonargaon University, 2017-06-15)
      Bangladesh is disaster prone country and community participation is most effective way to cope up disaster risk. As a disaster prone country)) ever!- year thousands of live and resources has been destroying at the time ...

    • An Empirical Study on Determining the Association Between Micro Finance and Poor's Access: Evidence from Pakistan 

      Rashidin, Md.Salamun; Javed, Sara; Jian, Wang (Sonargaon University (SU), 2017-06-15)
      The aim of this research paper is to investigate the relationship between the impacts of'micro finance on poor people's access. This study consists of quantitative methodology. The aims of these methodologies are to find ...

    • Performance Evaluation of Cement Industry of Bangladesh: A Case Study on Some Selected Firms 

      Tabassum, Tonny; Hasan, Mainul; Begum, Latifa (Sonargaon University (SU), 2017-06-15)
      This Part-II of the manuscript reports on the unsteady two-dimensional numerical investigations of melting oJ'a para/fin wax (phase change mqterial, PCM) which melts over a temperature range of 8.7'C. The PCM is placed ...