Department of Mechanical Engineering: Recent submissions

Now showing items 501-520 of 593

    • Design and Construction of Automatic Bottle Filling and Counting and Liquid Tank Level Monitoring 

      Md. Rubel Hosen, BME-220551; Uddin, Ala; Rana, Md. Sohel; Badsha Bhuiyan, Md. Sekandar (Sonargoan University, 2022-05-15)
      The world is increasing moving towards Automation, the process of performing various tasks without or with minimum human intervention. It increases the overall efficiency and output of a process. It involves establishing ...

    • Governing System Between Engine & Compressor on Air Brake System For Commercial Vehicle 

      Khan, Mutasim Billah; Hossain, Deloar; Mahtab, Azmain; Md. Reaj Ahmed (Sonargoan University, 2022-05-04)
      The safe operation of vehicles on roads depends, among other things, on a properly functioning brake system. An ‘Air Braking System’ has been designed to use in commercial heavy vehicles with heavier braking capacity ...

    • Automatic Braking of Locomotive System To Avoid Accident By Using Arduino Based Sonar And IR Sensor 

      Anowar Hossain, BME-220546; Ahmed, MD.Shakil; Ali Khan, MD:Saiful; Alam, MD:Mahbub (Sonargoan University, 2022-05-06)
      Railway is the most popular and friendly transportation system of the largest part of the cities in the world. Train is widely used for comfortable and safe journey in a reasonable fare. People from different professions ...

    • Design and Implementation of an Automatic Waste Segregation System 

      Shaiful Islam, BME-220545; Talukder, Shawkot Ahmed; Reza, Md. Shamim; Joy, Abdal Ahmed (Sonargoan University, 2022-05-12)
      This project is a way to achieve this good cause. In this project, IoT based smart dustbin is built on a micro controller - based platform Node MCU board which is interfaced with three Proximity Sensor, Ultrasonic ...

    • Dairy Farm Automation by Using Line Follower Robot and Automated Dairy Farmn Cleaning 

      Md. Nazmul Sharif, BME-220545 (Sonargoan University, 2022-02-06)
      In 2021 human 1ime and there phy sical work are more valuahle. If we use this project then it's will help us for save money and time which we can nvest another place. Aim of this work was finding the way to save ...

    • Smart Solar Grass Cutter System 

      Md. Iman Sardar, BME-220542; Ash, Md. Mehedi; Bain, Jayanto; Hossa, Md. Istiak; Ali, Md. Mubashwer (Sonargoan University, 2022-05-19)
      This project is proposing an effective goal for developing a machine that will perform useful task independently with minimal supervision. The objective of this project is to discover the current issues in implementing ...

    • Development 7 Vehicle Security system with GSM Module 

      Md Reajul Huq Munna, BME-220541; Kabir, Kh. Hasanul; Islam, Sariful; Arefin, Md. Faysal; Alam, Md. Jane (Sonargoan University, 2022-05-12)
      Substantial increase in automobile theft figures internationally calls on for a robust automobile security system which can offer real time monitoring and control rather than just intimating about theft. In this paper, ...

    • Prototype Biogas Plant for Residential Use 

      Kazi Mahmudul Hasan, BME-210506; Hossain, Md. Azad; Hasan, Md. Tausk; Moniruzzaman, Md.; Islam, Md. Robiul (Sonargoan University, 2021-02)
      Currently the evolution of industry and the growing population use a lot of energy. So, we have been using fossil fuels as the primary source of the energy but it is declining very fast and its badly affect environment. ...

    • Design and Construction Cylindrical Solar Water Heater 

      Ahmed Kaiser Ronok, BME-210503; Sohel, Md. Abu; Ali, Md. Shobuj; Alam, Nur; Hossain, Md. Amzad (Sonargoan University, 2021-10-21)
      In the present review paper, the existing solar water heating systems are studied with their applications. Nowadays, hot water is used for domestic, commercial and industrial purposes. Various resources i.e. coal, ...

    • Digital Conference Hall/Class Room 

      Md. Aman Ullah Aman, BME-210502; Al Monsur, Zakaria Shah; Rahman, Md. Mizanur; Goswami, Dipok; Kumar, Sree Asik (Sonargoan University, 2021-06-28)
      ABSTRACT In this project, the automation system is developed where we have, an automatic lamp, an automatic temperature control fan and visitor counting system on the digital conference hall/class room. Both of these ...

    • Design and Fabrication of an Automatic Double Hacksaw 

      Ataur Rahman, BME-200383; Hossain, Selim; Alam, Md. Shahinur; Islam, Md. Mirajul; Hussain, Nazmul (Sonargoan University, 2020-02-06)
      1.A hacksaw is a fine-toothed saw, originally and mainly made for cutting metal, plastic or wood. For industries to realize the production, it is necessary to cut metal, plastic bars with high rate. So, it’s not possible ...

    • Construction of Mini Electric Chiller 

      Md. Rasedul Islam, BME-200382; Zaman, Md. Rashed; Islam, Hedayetul; Roy, Dalim Kumar (Construction of Mini Electric Chiller, 2020-02-04)
      A chiller is a device which cool a fluid by removing heat from it, either through a vapour – compression cycle; with the key components being the compressor, condenser, evaporator and expansion device... This paper ...

    • Study of Fabrication of Emergency Eye Wash 

      Md. Assaduzzaman, BME-200381; Das, Hirdoy; Hasan Bappy, Md Hasebul; Hasan, Md. Naser; Day, Jewel Chandro (Sonargoan University, 2020-02-06)
      Chemical contact with eye can cause severe ocular damage leading to blindness. Treatment of on ocular burn can be sever and difficult to manage. New designs of eye wash stations have been developed in which the direction ...

    • Design ,Construction, and Performance Test of Induced Draft Wet Counter Flow Cooling Tower 

      Md. Saiful Islam, BME200380; Islam, Md. Shariful; Chowdhury, Miton (Sonargoan University, 2020-02-10)
      A cooling tower is a heat rejection device that rejects waste heat to the atmosphere through the cooling of a water stream to a lower temperature. Cooling towers are used in all heat producing industries. Cooled water ...

    • Fabrication of an Automatic Barking system 

      Md. Al Amin, BME-200379; l Islam, Md. Nazmu; Kamruzzaman, Md. (Sonargoan University, 2020-02-19)
      An ultrasonic car braking system includes; an ultrasonic wave emitter provided in a front or portion of an automatic braking car producing and emitting ultrasonic waves frontward in a predetermined distance in front of the ...

    • Construction and Modification Of A Rocker-Bogie Mechanism Using Solar PV Cell System 

      Md. Tariqul Islam, BME-200377; Khan, Md. Odeya; Hossain, Md. Al-Amin; Hossain, Md. Anayet (Sonargoan University, 2020-02-04)
      The project was carried out to assess the Construction and Modification of a Rocker Bogie Mechanism using Solar PV cell system and designing to be used at slow speeds which is capable of overcoming obstacles that are on ...

    • Design & Construction of Automatic Railway Level Crossing System 

      Haider Khan, BME-200376; Ahmed, Tanvir; Ibn Jahir, Jobayer; Haldar, Rafayel (Sonargoan University, 2020-02-15)
      The present work attempts to automate the opening and closing of gates at a railway level crossing. In general, level crossing gates are operated manually by a gate keeper. The gate keeper receives the information about ...

    • Experimental Study of Solar Home System 

      Md. Osman Gony Lalon, BME-200375; Ahammed, Md. Tanvir; Saha Jalal, Gazi Mohammad; Shahnewaz; Asif Nihal, Asif (Sonargoan University, 2020-01-19)
      Solar energy is one of the most popular form of renewable energy. The use of solar panel is increasing rapidly all over the world. Fortunately, the location of Bangladesh is quite suitable for harnessing solar energy. ...

    • Construction and Analysis a in Injector for Accurate Fuel Injection 

      Ashrafuzzaman, BME-200372; Sarker, Md Mamun; Mamun, Abdullah Al; Hossain, Mosharraf (Sonargoan University, 2020-02-06)
      Controlling fuel injector positions is recognized as a challenge for injection spark ignition engines. These papers give a comprehensive overview of the study about the structure, measurement and impact of the engine's ...

    • Design, Construction and Onstruction and Performance Test of a Remote Controlled Scissor Jack 

      Ismail Hossain, BME-200371; Jewel, Md.; Islam, Md. Ariful; Hasan Sarker, Md. Rashadul (Sonargoan University, 2020-01-15)
      A Scissor Jack is a mechanical device used to easily lift a vehicle off the ground, to gain access to sections underneath vehicles or to change the wheel. The most important fact of a jack is that it gives the user a ...