Now showing items 481-500 of 532

    • Temperature Reduction of an Active Solar House by Using Chimney and Comparison of Room Temperature with the Conventional One 

      Md. Toufiqur Rahman, BME-200296; Hasan, Md. Nahid; Arefin, Mahmud; Hassa, Md. Abid (Sonargoan University, 2020-02-19)
      Solar Temperature reduce is another efficient use of renewable energy technology to help cool our homes and work places. The necessity for air-conditioning for our homes in hot areas around the world and the abundance ...
    • Fabrication of an Automatic control of Refrigeration System 

      Md. Emdadul Haque, BME-200295; Islam, Md. Rubel; Haque, Md. Zahurul; Ahmed, Md. Rasel; Solaiman, Md. (Sonargoan University, 2020-02-15)
      Refrigeration is the process of removing thermal energy from a low temperature reservoir and transferring it to a high temperature reservoir input a requiring the input of energy. Node MCU (Micro Controlling Unit) is ...
    • Design and Fabrication of Three-way Unloading Machine 

      K.M Tariqul Islam, BME-200294; Shekh, Md. Sahajada; Aditya, Protik; Hossain, Md.Monir (Sonargoan University, 2020-02-03)
      In industrial and domestic considerations, tippers can pull a variety of products including gravel, grain, sand, fertilizer, heavy rocks. the older dropping trolley or dumper has been conceived by observing the difficulty ...
    • Development of Advance Patient Monitoring System Using Microcontroller 

      Md. Milon Sarkar, BME-200293; Uddin, Md. Kutub; Sheikh, Md. Ripon; Alam, Md. Shafikul (Sonargoan University, 2020-02-19)
      Machines can perform highly repetitive tasks better than humans. Worker fatigue on assembly lines can result in reduced performance, and cause challenges in maintaining product quality. An employee who has been performing ...
    • Advanced car parking system using a forklift 

      Antora Naznin, BME-200292; Al Mamun; Amin, Ruhul; Ahmed Hiron, Shah Sabbir (Sonargoan University, 2020-02-20)
      In today's life, there is a wide variety of forklifts, from the large heavy loading truck to the one that works among narrow aisles. Forklifts have become one of the basic transportation tools we use in our lives. With ...
    • Turbocharging as an Approach to Better Engine Volume Utilization 

      Md. Mahbur Rahman, BME-200291 (Sonargoan University, 2020-02-04)
      energy coming from engine is divided as follows in figure 1 Turbocharging technology is increasing the power of engine Without increase of piston displacement. Therefore, this Technology has a Name general name “Downsizing” ...
    • Design and Fabrication of Pneumatic Sheet Cutting Machine 

      Md. Reza Hossain, BME-200290; Kamal, Mohammad; Ahmed, Md. Jakir; Abdullah, Md. Eusuf (Sonargoan University, 2020-01-15)
      Usually the sheet metal cutting machine is manually hand operated for medium and small scale industries. This paper gives an insight about the pneumatic sheet metal cutting machine. Any pneumatic machine aimed for ...
    • Smart Wireless Gantry Crane System 

      Bahadur, Md. Talha; Reza, Md. Salim; Aziz, Md Tarik; Md. Sabbir Hossain Durlab, BME-200288 (Sonargoan University, 2020-02-04)
      The main objective of this work is to design robust, fast, and practical controllers for gantry crane. The controllers are designed to transfer the load from point to point as fast as possible and, at the same time, ...
    • Fabrication of a Water Treatment Plant 

      Md. Abdul Muhit Rubel, BME-200287; Kabir, Md. Humayun; Rahman, Md. Manzur; Uddin, Md. Myne; Munsur, Md. Abdullah Ebne (Sonargoan University, 2020-02-19)
      The purpose of this thesis is reduction of water drawn from the waste water to secure the coming future, making the premises & surroundings healthier through increased green area. Herewith water management options could ...
    • An experimental analysis on the performance of a vertical axis wind turbine 

      Bikash Sarker, BME-200286; Jakarea, Md.; Jahan, Md. Rakin Absar (Sonargoan University, 2020-02-12)
      Wind energy is the most available form of renewable energy among all the energy sources. Wind energy can be extracted by a wind turbine and can be converted into electrical energy using proper electricity generating ...
    • Design and Fabrication of Android Operated Fire Fighting Vehicle 

      Rason Chakma, BME-200285; r Rahman, Md Shohanu; Rana, Md Masud; Gani, Osman (Sonargoan University, 2020-02-01)
      Automatic fire reorganization with smart security system is now a days used worldwide for better safety and security. In the recent year, Vehicles are turned out to be an ingredient over which many people had shown their ...
    • Increasing a Motorcycle Engine Performance by Using a Non Conventional Supercharger 

      Md. Mohaiminul Islam, BME-200284; Islam, Md. Ariful; Hossain, Md. Al Mamun; Hanif, Md. (Sonargoan University, 2020-02-05)
      The information of this paper provides the instructions to improve engine performance using non conventional super-charger at a low cost. In this study a new designed non-conventional super charger was tested in a small ...
    • Experimental Analysis on Power Generation Using Speed Breaker with Rack and Pinion Mechanism 

      Biswas, BME-200283Azay Kumar; Rahman, Atiqur; Dey, Hiron (Sonargoan University, 2020-02-04)
      The count of vehicles passing over speed breakers on roads has increased these days. Such speed breakers are designed for heavy vehicles, as it increases the input torque and ultimately results in increasing the power as ...
    • Retrofitting of Backup Air-Conditioning System In Air- Conditioned Vehicle 

      Md. Mizanur Rahman, BME-200282; Rahman Tipu, Md. Masudur; Mahmud, Md. Tanjil (Sonargoan University, 2020-01-10)
      This thesis has been performed for the design of backup air conditioning system of interior of the car. Air conditioning system is mainly used in passenger and commercial vehicle. The purpose of this system is to make ...
    • Construction of Mini Fan Coil Unit 

      Md. Sujon Ali, BME-200281 (Sonargoan University, 2020-02-19)
      A microcontroller-based fancoil unit(FCU) fuzzy controller is designed and implemented in this paper. The controller employs the concept of duty ratio on the electric valve control, which could make full use of the ...
    • Design and Fabrication of a U tube type BFU Heat Exchanger 

      Md. Nesar Uddin, BME-200276; Habib, Ahsan; Kabria, Md. Golam; Adnan, Md. Sakil (Sonargoan University, 2020-01-15)
      A heat exchanger is an equipment used for transferring heat from one medium to another. There is a wide application of u tube type heat exchanger in the field of industrial applications for its enhanced heat transfer ...
    • Gesture control (Gyroscope) based transmitter unit and voice module based received station with Arduino UNO and Arduino Nano and other sensors. 

      Suvaghya Basak, BME-200275 (Sonargoan University, 2020-02-10)
      The hand gestures can be used to represent various signs with the help of the flex sensors. The gesture representation includes the movements such as angle bends and direction changes. The flex sensors which are fitter ...
    • Construction of Solar Automated Water Irrigation system controlled by Mobile messaging 

      Alom, Md. Shahin (Sonargaon University (SU), 2020-01-01)
      The traditional irrigation system involves most manual labor intensive task. Farmers usually work on large portions of land to grow different types of crops. It is not always possible for one person to be able to keep track ...
    • Design, Construction and Performance Test of an Industrial Power Generation System Using Dyeing Machine Exhaust Steam 

      Rahman, Md. Jihadur; l Islam, Md. Meraju; Islam, Md. Reazul; Ahamed, Md. Kawsik (Sonargaon University, 2020-02-12)
      III Abstract Power sector of Bangladesh is a challenging sector and development of power sector is dependent on many factors. In this project, a brief discussion on industrial power generation by using dyeing machine ...
    • An Experimental Study on Voice controlled Smart Locking System 

      Ali, Md. Hosan; Hossain, Belal; Islam, Mir Md. Ariful; Islam, Md. Rafiqul; Kashem, Md. Mir (Sonargaon University, 2020-02-20)
      Voice is utilized in this project for control doors or gates or any other security system. The reason for selecting a voice is because it's simply being reproduced by a human. Besides that, usage of voice provides a ...