2021 - 2025: Recent submissions

Now showing items 141-160 of 297

    • Experimental Analysis Of Chip Formation And Chip Breaking Process In Mental Cutting. 

      Suvo, Kamrul Hasan; Beacon, Mohtasim Mahdi; Hossain, Sayed Mamun; Munshi, Mamun; Islam, MD Ashraful; Raza, Selim (Sonargoan University(SU), 2023-05-06)
      This thesis investigates the phenomenon of chip formation and chip breaking process in metal cutting, which is a crucial aspect of modern manufacturing processes. The objective of this study is to understand the ...

    • Design and Construction of Belt Type Oil Skimmer 

      Siddique, Abubakar; Islam, Md. Saiful; Howlader, Md. Manirul Islam; Md. Shohan; Bepari, Avijit (Sonargoan University(SU), 2023-05-15)
      Nowadays there are lots of oil accidents happening in the ocean and it makes huge impact on environment. Due to Sea accidents can further cause oil pollution. So the oil separator systems are necessary in such cases. ...

    • Design and Fabrication of system to Produce oil from waste plastics 

      Islam, Atikul; Mollah, Rasel; Akter, Lima; Islam, Md.Foysal; Sadi, Md.Shak (Sonargoan University(SU), 2020-05-10)
      The study focused on the design and fabrication of a waste plastic oil converter as an effort in finding environment-friendly means of waste recycling. It is an alternative solution to increasing problem of waste ...

    • Design & Implementation of Energy Saving Street Light System with Car Speed and Measurement and Alert System Using Smart Technology 

      Hannan, Abdul; Joy, Sumit Sarker; Hossain, Md Shakib; Amin, Md Ruhul; Hasan, Md Mahmudul (Sonargoan University(SU), 2023-05-12)
      The Car Speed Measurement & Alert System with strategically light on features is a project aimed at enhancing traffic safety by measuring the speed of vehicles on the highway and alerting drivers when they exceed the ...

    • Design and Construction Of A Power Generation Through Speed Breaker. 

      Hasan, Md. Nahid; Jahidul, Md.; Rubel, Md.; Islam, Md. Saiful; Hassain, Md. Sajib (Sonargoan University(SU), 2023-01-06)
      Energy is the most fundamental requirement for the continued existence of any living thing in the cosmos.Everything that occurs in the world is a manifestation of energy flowing in some manner. However, conventional ...

    • Design and Fabrication of Automatic Pneumatic Ramming Machine 

      Chakma, Shoylen; Mohonto, Bijoy Chandra; Sorna, Farhana Easmin; Hassan, Mahbubul; Alam, Md. Sazzadul (Sonargoan University(SU), 2023-01-06)
      This project is a study about the design and fabrication of automatic pneumatic ramming machine, which shows the capability to design a concept using variety of components. As the name implies, pneumatic systems use ...

    • Design and Fabrication of Coin Operated Automatic Cola Vending Machine 

      Rayhan, Md. Abu; Shihat, Sakaowardi Khan; Akter, Afsana; Rahman, Md. Mahfuzur; Neamul Kabir, Neamul (Sonargoan University(SU), 2023-01-06)
      Vending Machines are automated machines that dispense selling products such as Cola, snacks, beverages, lottery tickets, and etc. It is vital to save time and reduce human energy. These vending machines are developed ...

    • Design And Construction Of Automatic Nozzle Spray For Killing Insects/Pest From Agriculture Land. 

      Rahman, Md. Hafizur (Sonargoan University(SU), 2023-01-15)
      Internet of Things (IOT) devices are exposed to many advanced vulnerabilities and various new inventions Bangladesh has agriculture as its primary occupation. Economy of the country highly depends on Agricultural ...

    • Numerical Study on Adhesively Bonded Stepped Joints. 

      Anwar, Md Sayed; Hasan Ziad, Md Mehedi; Islam, Md Manirul; Hasan, Md Ariful (Sonargoan University(SU), 2023-01-06)
      To investigate the behavior of different types of lap joints as material and geometric properties are varied under tensile loading, an analytically verified finite element parametric study was conducted on both ideally ...

    • Fabrication And Performance Test Of The Thermoelectric Refrigerator. 

      Bapery, Md. Arif; Ahmed, Shaheen; Fazlarrabbi; Hossain, Md. Sharif; Al-Mutakabbir (Sonargoan University(SU), 2023-01-19)
      Thermoelectric Devices are solid state devices which directly convert thermal energy to electrical energy and vice versa. In their recent past, a lot of effort has been made to improve the performance and also the power ...

    • A Design Of Boiler Feed Water And Temperature Monitoring System Based On PLC. 

      Mamun, Md.Al; Aktar Lota, Mst.Kohinur; Bari, Md.Abdul; Hasan, Mahedi; Hosen, Md.Mellat; Bashar, Habibul (Sonargoan University(SU), 2023-01-06)
      Boiler is the main component in generating steam in thermal power generation units and its control is very important in many applications. In present situation conventional PID control is being used for this purpose. ...

    • Performance Test Of Heat Exchanger by Using Different Material Tubes. 

      Sarker, Paritosh Chandro; Islam, Khairul; Md. Selim Reza; Mobarak, Hosne; Rahaman, Md. Matiur (Sonargoan University(SU), 2023-01-06)
      Heat exchanger is equipment used to transfer heat from one fluid to another. It has extensive domestic and industrial applications. Extensive technical literature is available on heat exchanger design, operation and ...

    • Performance Test of Automatic Multi- Axis Solar Tracking System Using Arduino 

      Islam, Md. Kamrul; Islam, Mainul; Rakib, Imrul Kayes; Hasan, Md Mehedi; Hossain, Md Miraz (Sonargoan University(SU), 2023-01-06)
      The solar tracking system plays a major role in which it is used to capture the maximum power from the sunlight. In Bangladesh, for both urban and rural residents, obtaining sufficient and dependable power is a key ...

    • Design ,Construction And Performance Test Of Industrial Water Cooling Tower. 

      Rana, Md.Sohel; Hussain, Md.Aslam; Ali, Md.Kowsar; Hossain, Sakhawat; Ali, Imran; Amin, Md.Al (Sonargoan University(SU), 2023-01-06)
      A cooling tower is a device used to lower the temperature of a water stream by rejecting waste heat to atmosphere. Generally, the cooling tower may use the evaporation process of water to remove waste heat to atmosphere ...

    • Design, Construction and Performance Test Boiler Water Flow and Temperature Control System. 

      Hasan, Md. Zahid; Hossain, S M Sazid; Alam, AKM Jahangir; Islam, Md. Tazul (2023-01-06)
      Boiler is the main component in generating steam in thermal power generation units and its control is very important in many applications. In present situation conventional PID control is being used for this purpose. ...

    • Integrated Security System For Vehicle And Passenger. 

      Rimon, Kamruzzaman; Halim, Abdul; Hossain, Md. Anwar; Bhuyan, Md. Arafat; Islam, Md. Zahidul (Sonargoan University(SU), 2023-01-06)
      This paper offers with layout and improvement of an IoT primarily based embedded device for GPS tracking, monitoring vehicle passengers, and counting the total passengers. At that time, it also calculates fuel consumption ...

    • Fabrication of Savonious Wind Turbine Power Generation System with Inverter 

      Islam, Jahidul; Islam, Samsul; Islam, MD. Heathatul; Das, Subrat (Sonargoan University(SU), 2023-01-06)
      Wind energy is the current “star” in the field of renewable energy for electrical production. Still, the power generated by wind turbines over time is characteristically uneven due to the unpredictable nature of their ...

    • Construction Of An Evaporative Ciiler System By Using Solar Energy. 

      Islam Hemal, Md. Mazharul; Hasan, Najmul; Rajib, Md.; Monadil, Md. Moholile; Anjum, Nishat (Sonargoan University(SU), 2023-01-06)

    • Fabrication and Performance Test of A Flat Plate Collector Passive Solar Heater. 

      Rana, Jewel; Rana, Md Juwel; Hosen Lovlu, Md Sohrab; Hosen, Md Faruk; Rahman, Md Hashibur (Sonargoan University(SU), 2023-01-15)
      Solar energy is getting popular nowadays. Most of the technologies have been developed which made solar energy a cheaper and reliable source of energy. Due to pollution and other factors, solar has become the most ...

    • Experimental study on the thermal performance of a closed loop pulsating heat pipe with two different inserts 

      Al Mamun, Ahammad; Husain, Md Shamim; Hasan, Md Zahid; Kabir, Md. Anayet; Akash, Md. Mursalin (Sonargoan University(SU), 2023-02-15)
      Thermal control is crucial for managing small electrical and electronic equipment. The most effective method for thermal management is becoming recognized as a closed-loop pulsing heat pipe (CLPHP). This experimental ...